| 美國(guó)OFITE:171-90-01 滲透性堵漏儀:配件(石油測(cè)試)推廣!原裝進(jìn)口! |
| |
| #153-14 Graduated Cylinder, 50 mL × 1 mL, Glass |
| #154-20 Thermometer with Metal Dial, 8" Stem, Dual-Scale:50° - 500°F (0° - 250°C) |
| #170-04 CO2 Pressuring Assembly |
| #170-13-2 O-ring for Test Cell, Buna N |
| #170-17 O-ring for Valve Stem |
| #170-19 Filter Paper, Specially Hardened for Filter Presses,21?2" (6.35 cm) Diameter, Box of 100 |
| #170-53 Filter Disk, 10 Darcies, 35 μm, 2.5" × 0.25", Ceramic |
| #170-72 Spacer for Filter Paper, 1?4", 316 Stainless Steel |
| #170-77 O-ring for Spacer |
| #171-00 Heating Jacket, 800-Watt (115-Volt Only) |
| #171-01 Heating Jacket, 800-Watt (230-Volt Only)For sub-components, refer to page 36. |
| #171-10 Back Pressure Receiver, 100 mL |
| #171-22 Retainer Pin |
| #171-26 Hose, 5000#, 3?16" × 3' |
| #171-84-02 Reducing Bushing, 3?8" MNPT × 1?8" FNPT, 316Stainless Steel |
| #171-90-02 Quick Coupler, Female, 1?4" NPT |
| #171-90-03 Quick Coupler, Male, 1?4" NPT, |
| #171-90-04 Cross, 1?4" NPT, 316 Stainless Steel |
| #171-90-06 Reducing Bushing, 1?4" MNPT × 1?8" FNPT, 316Stainless Steel |
| #171-90-07 Hex Nipple, 1?4" NPT, 316 Stainless Steel |
| #171-90-08 Valve Stem, Hydraulic Entry |
| #171-90-09 Valve Stem, Filtrate Outlet |
| #171-90-10 Valve Stem, Receiver Entry |
| #171-90-11 Elbow, Female, 1?8" NPT, 316 Stainless Steel |
| #171-90-12 Elbow, Male, 1?4" NPT, 316 Stainless Steel |
| #171-90-13 Adapter, 1?4" Flare × 1?4" Male NPT, Chrome |
| #171-90-14 Hose Barb, 1?8" NPT × 1?4" |
| #171-90-15 Adjustable Crescent Wrench, 6" |
| #171-96 Handpump, Single-Speed |
| #171-96-1 Hydraulic Oil, 32 oz |
| #171-97 Valve for Cell Outlet, 1?8" |
| #171-98 Ball Valve for Inlet Pressure, 1?4" |
| |
| #170-16 Valve Stem, 3.25" (8.3 cm) |
| #170-26-1 Hardened Locking Screw |
| #170-27 Allen Wrench, 5?32" |
| #170-69 End Cap for Ceramic Disks, Scribed, 2500 PSI,316 Stainless Steel |
| #171-02 Cell Body, Double-End, 10", 500 mL, 316Stainless Steel |
| #153-55 Stopcock Grease, 150 g Tube, Silicone |
| #171-41 Gauge, 5000 PSI, 21?2" Face, 1?4" Bottom |
| |
| #171-84-03 Strap Wrench |
| #171-85 Double-End Cell Assembly with Floating Piston,500 mL, 4000 PSI, 10"For sub-components, see page 55. |
| #171-87 Location Pin |
| #171-92-1 Relief Valve, 4000 PSI (27.6 MPa) |
| #171-21 Cell Cap with 60 μm Screen, 2000 PSI, 316Stainless Steel |
| #171-42 Gauge, 3000 PSI, 21?2" Face, 1?4" BottomConnection |
| #171-92 Relief Valve, 2200 PSI (15.2 MPa) |
| #171-93 Piston |
| #171-95 T-handle for Piston |
| #171-99 O-ring for Piston |
| |
