RT290 - High Speed Test System

Product Summary

The RT290 is the latest in a line of a dedicated parametric test systems for monostable and bistable relay devices with up to 8 changeover contact sets. By noting the various limitations and drawbacks of existing relay test equipment the RT290 has been equipped with many advanced features.

Key Features

• Fully parallel test architecture
• Accurate digital timing
• Full 4-wire Kelvin device measurement.
• High-reliability - RT290 uses only solid-state test switching.
• Test fixture continuity test.
• Programmable contact loads
• Traceable internal standards
• Fast compiled software
• Integral Windows based PC controller
• Menu style programming
• Test programs compatible with our Reflex 10, 10M, 20 250 and 510 systems
• Fully automatic handler and solenoid-based test fixture support

ASY0700 High Current Load Option

The ASY0700 adds programmable 0 - 30 Volt / 0 - 10 Amp contact load capability.

RT900 Hipot and Leakage (insulation resistance) Option

Dielectric breakdown (Hipot) and Insulation Resistance (Leakage) testing may be added to the RT290 parametric tests using the RT900 high voltage test system.

ASY0710 AC Coil Drive Option

AC coil drive capability over the range 0-270Vac and 50-400Hz may be added using the external ASY0710 power supply unit. This unit can be configured with a second programmable low power output primarily intended to be connected to the control pin of timing relays. A multiplexer option provides total coil pin multiplexing over eight output pins. All connections are fully Kelvin. Please click here for more information.

Standard Internal contact loads 0-255mV / 10mA, 6V / 10mA, 6V / 100mA
Contact load options 12V/1A , 28V / 100mA 0 - 30V / 0 - 10A
Max no. contacts 8 PCO
Coil types monostable, dual coil latching
Coil drive DC: 0 – 80V / 0.4A ( 0 - 380V / 0.1A option )