| SPECIFICATIONS |
| Specifications apply after 30 minute warm-up, ambient 5?C to 40?C |
| FREQUENCY |
| Frequency Range: | 10MHz to 1000MHz |
| Setting Resolution: | 1kHz by direct keyboard entry, or in user-set increments of 1kHz to 999?999MHz by rotary control or increment?decrement keys. |
| Display Resolution: | 1kHz |
| Accuracy: | ? 2 ppm over temperature range 5?C to 40?C. |
| Stability: | <1ppm/year ageing. |
| Phase Noise: | -110dBc/Hz at 25kHz offset, 500MHz carrier. |
| Residual FM (FM Off): | : |
| Equivalent peak deviation for 300Hz to 3?4kHz B/W: | 10Hz at 100MHz carrier, 35Hz at 500MHz carrier, 180Hz at 1000MHz carrier |
| OUTPUT LEVEL |
| Output Level Range: | ?127dBm to +7dBm (0?1?V to 500mV into 50W). |
| Setting Resolution: | 0?1dB (or 0?01?V to 1mV) by direct keyboard entry, or in user-set increments of 0?1dB to 100dB (or 0?01?V to 100mV) by rotary control or increment?decrement keys. |
| Accuracy: | Better than ? 2dBm, except for output levels <-70dBm at 500 -1000 MHz, ? 3dBm. |
| Harmonics: | Typically <-25dBc, maximum ?20dBc, any carrier frequency, output level <0dBm. |
| Non-Harmonic Spurii: | <?60dBc at >8kHz offset. |
| Carrier Leakage: | <0.5uV generated into a 50W load by a 2 turn 25mm loop, at 25mm from the generator with output set to <-10dBm into a 50W sealed load. |
| Output Impedance: | 50W |
| Output Connector: | TYPE N |
| Reverse Protection: | 50V DC |
| Output Switch: | RF OUT on-off switch with LED for ON status. |
| FM MODULATION |
| Peak Deviation: | 0?5kHz to 100kHz. |
| Setting Resolultion: | 0?5kHz by direct keyboard entry, rotary control or increment?decrement keys. |
| Modulation Frequency: | Internal 1kHz; External 300Hz to 50kHz |
| Deviation Accuracy: | <?10% of setting ?0.5kHz, excl. residual FM, for 1kHz modulation, internal or 1Vrms external. |
| External Modulation | |
| Frequency Response: | ? 1dB from 30Hz to 50kHz relative to 1kHz. |
| Distortion: | <2% total harmonic distortion at 1kHz mod. frequency, 100kHz deviation and 500MHz carrier. |
| Input Impedance: | 100kOhm |
| Input Connector: | BNC |
| INTERFACES |
| Full remote control facilities are available through the RS232 (standard) or optional GPIB interfaces. |
| RS232: | Variable Baud rate, 19200 Baud maximum, 9-pin D-connector. Compatible with Thurlby Thandar ARC (Addressable RS232 Chain). |
| IEEE-488: | Conforming with IEEE488?1 and IEEE488?2. |
| GENERAL |
| Display: | 20 character x 4 row backlit alphanumeric LCD |
| Data Entry: | Keyboard selection of frequency, amplitude, etc.; value entry by numeric keys or by rotary control. |
| Stored Settings: | Up to 9 complete instrument set-ups may be stored in battery-backed memory. |
| Size: | 3U (130mm) height; half-rack (212mm) width; 330mm long. |
| Weight: | 4?6 kg. (10 lb) |
| Power: | 230V, 115V or 100V nominal 50/60Hz, adjustable internally; operating range ?14% of nominal; 30VA max. Installation Category II. |
| Options: | IEEE-488 interface; 19 inch rack mounting kit. |
| ENVIRONMENTAL & SAFETY |
| Operating Range: | +5?C to 40?C, 20-80% RH. |
| Storage Range: | ?20?C to + 60?C. |
| Environmental: | Indoor use < 2000m, Pollution Degree 1. |
| Safety: | Complies with EN61010-1. |
| EMC: | Complies with EN61326 |
