SEINTL輻射探測器Inspector 輻射表輻射檢測儀

SEINTL手持式輻射探測器Inspector EXP+ 輻射表輻射檢測儀

SEINTL手持式輻射探測器Inspector Xtreme 輻射表輻射檢測儀

Inspector多功能射線儀可檢測Χγαβ射線

Inspector是小的手持式微處理器控制的高靈敏度低水平能檢測Χγαβ射線。直接讀出射線水平。另外，有可調整的定時器和外部校準鍵。

檢測器：

具有云母窗口的GM管，窗口直徑45 mm

Inspector (只有內部GM管)

在前面板中心有射線標記標記

Inspector EXP(只有外部探頭)

在儀器外部具有把手，有與Inspector相同的GM管探頭。

電源要求：一節9V堿性電池。電池壽命200小時

該劑量?jī)x采用一支蓋革-彌勒計數管來測定αβγ及Χ射線輻射，數字顯示，探頭為內置式，使體積更小靈敏度更高。

技術指標：

劑量率：mR/hr(毫倫/小時) 0.001～100μSV/ hr(微希伏/小時) 0.01～1000

計數：（每分鐘計數）0～300000 CPS（每秒鐘計數）0～5000

計數時間選擇：為了測量低計量的α線和β射線可選擇1分-24小時

連續計數再除以計數時間變?yōu)?/span>或CPS

：<&plun;15%

重量：272g

體積：150×80×30㎜

Inspector Handheld Dial Radiation Alert® Detector   a ß y x 

The Inspector is a all, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The dial readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer, external calibration controls and adjustable alert.

Specifications

Detector

Internal Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.75 in.). Radiation symbol on front label marks the center of the detector.

Display

4 di liquid crystal display with indicators.

Averaging Periods

Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases

Energy Sensitivity

Detects Alpha down to 2 MeV.Detects Beta down to .16 MeV; tical detection efficiency at 1 MeV is approx. 25%. Detects Gamma down to 10 KeV through the end window. 3340 /mR/hr (Cs137). allest detectable level for I125 is .02 µCi at contact.

Operating Range

mR/hr - .001 (1µR) to 100 - 0 to 350,000

µSv/hr - .01 to 1000 CPS - 0 to 5000

Total/ Timer - 1 to 9,999,000 counts

Accuracy

mR/hr &plun;10% tical (NIST), &plun;15% max - 0 to 100

µSv/hr &plun;10% tical (NIST), &plun;15% max - 01 - 1000

&plun;10% tical (NIST), &plun;15% max - 0 to 350,000

(Referenced to Cs-137) 

AlertSet Range 

mR/hr .001 - 50 and 1 - 160,000. 70db @ 1m.

Count Light

Red LED flashes with each radiation event.

Audio Indicator

Internally mounted beeper (can be switched off for silent operation)

Outputs

Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration

Anti-Saturation

Meter will hold at full scale in fields as high as 100 times the maximum reading.

Power Requirements

One 9-volt alkaline battery. Battery life is approx.

2160 hours at normal background.

TemperatureRange 

-10ºC to 50ºC (14ºF to 122ºF)

Weight

Inspector: 273 grams (9.6 oz.) without battery.

Size

150 x 80 x 30 mm (5.9 x 3.1 x 1.2 in.).

Includes

Carrying Case, CE Certification

Options

Observer Software, Xtreme Boot, Waterproof Case (Gamma & X-Ray Only), & Wipe Test Plate

Limited Warranty

1 year limited, 90 day Warranty on GM Detector 

Utility Menu

The Utility Menu offers several options accessible by holding down the + button while turning the instrument on.

•3 second (fast response)

•Switches from mR/hr and to µSv/hr and CPS

•Reset the cal factor to 100.

•Adjust the CAL factor.

•Reset all setting to default factory setting.

Accessories

Xtreme Boot

Waterproof Case

Observer Software

Stand

Wipe Test Plate

Inspector EXP+ Handheld Dial Radiation Alert® Detector    a ß y x

The Inspector EXP was designed to meet the requirements of emergency response personnel. It has the same valuable features, all size, and quality of the Inspector. However, instead of the built-in detector, it has the added versatility of an external probe. The carrying case has a clear window panel providing full view of the readout, count light, access to the switches, and a convenient belt loop for carrying the instrument. A all pocket is provided for a check source. The protective probe cover on the uniquely designed carrying case folds easily out of the way to allow one-handed operation if desired.

Specifications

Detector

RAP-RS1 Probe - External Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.75 in.). Radiation symbol on front label marks the center of the detector.

Display

4 di liquid crystal display with indicators.

Averaging Periods

Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases

AlertSet Range 

mR/hr .001 - 50 and 1 - 160,000.

70db @ 1m.

Count Light

Red LED flashes with each radiation event.

Audio Indicator

Internally mounted beeper (can be switched off for silent operation)

Outputs

Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration 

Energy Sensitivity

Detects Alpha down to 2 MeV.Detects Beta down to .16 MeV; tical detection efficiency at 1 MeV is approx. 25%. Detects Gamma down to 10 KeV through the end window.

Anti-Saturation

Meter will hold at full scale in fields as high as 100 times the maximum reading.

Power Requirements

One 9-volt alkaline battery. Battery life is approx.

2160 hours at normal background.

TemperatureRange 

-10º to 50ºC (14º to 122ºF)

Weight

Inspector: 273 g (9.6 oz.)

Size

150 x 80 x 30 mm (5.9 x 3.1 x 1.2 in.)

Probe: 260 X 70 X 38 mm (10.25 X 2.75 X 1.5 in)

Probe Construction

Anodized aluminum housing

Size - Approx. 8.75 in. (22.23 cm) Dia.: 2.75 in. (7.0 cm)

Connector - Amphenol-Tucal

Handle - Black foam grip

Weight - Approx. 11.5 oz. (328 g) w/o cable  

Gamma Sensitivity

3340 /mR/hr referenced to Cs137. allest detectable level for I-125 is .02 µCi at contact. Timer can set 1 minute sampling periods from 1 to 10 minutes.

Operating Range

mR/hr - .001 (1µR) to 100 mR/hr - 0 to 350,000

µSv/hr - .01 to 1000 CPS - 0 to 5000

Total/ Timer - 1 to 9,999,000 counts

Accuracy

mR/hr &plun;10% tical (NIST), &plun;15% max - 0 to 100

µSv/hr &plun;10% tical (NIST), &plun;15% max - 01 - 1000

&plun;10% tical (NIST), &plun;15% max - 0 to 350,000

(Referenced to Cs137)

Includes

Carrying Case, Cable for Inspector+ EXP: Beldon 9853 with Amphenol 31226 twinax. CE Certification.

Limited Warranty

1 year Limited Warranty, 90 day Limited Warranty on GM detector

Utility Menu

The Utility Menu offers several options accessible by holding down the + button while turning the instrument on.

•3 second (fast response)

•Switches from mR/hr and to µSv/hr and CPS

•Reset the cal factor to 100.

•Adjust the CAL factor.

•Reset all setting to default factory setting.

Accessories

Observer Software

Inspector Xtreme Handheld Dial Radiation Alert® Detector      a ß y x 

The Inspector Xtreme offers maximum performance in a lightweight, rugged solution for using your survey meter in the field. The Inspector Xtreme is designed specifically for individuals operating in tough environments, such as 1st Responders, miners, and HAZMAT crews. The unit is a all, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The dial readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer, external calibration controls,and selectable alert.

Specifications

Detector

Internal Halogen-quenched, uncompensated GM tube with thin mica window, 1.4-2.0 mg/cm2 areal density. Effective diameter of window is 45 mm (1.77 in.). Radiation symbol on front label marks the center of the detector.

Display

4 di liquid crystal display with indicators.

Averaging Periods

Display will update every 3 seconds. At low background levels, the update is the moving average for the past 30-second time period. The timed period for the moving average decreases as the radiation level increases.

Energy Sensitivity

Detects Alpha down to 2 MeV. Detects Beta down to .16 MeV; tical detection efficiency at 1 MeV is

approx. 25%. Detects Gamma down to 10 KeV through the end window. 3340 /mR/hr (Cs137).

allest detectable level for I125 is .02 µCi at contact.

Operating Range

mR/hr - .001 (1µR) to 100 - 0 to 350,000

µSv/hr - .01 to 1000 CPS - 0 to 5000

Total/ Timer - 1 to 9,999,000 counts

Accuracy

mR/hr &plun;10% tical (NIST), &plun;15% max - 0 to 100

µSv/hr &plun;10% tical (NIST), &plun;15% max - 01 - 1000

&plun;15% max - 0 to 350,000

(Referenced to Cs-137)

AlertSet Range

mR/hr .001 - 50 and 1 - 160,000. 70db @ 1m.

Count Light

Red LED flashes with each radiation event.

Audio Indicator

Internally mounted beeper (can be switched off for silent operation)

Outputs

Dual miniature jack drives CMOS or TTL devices: count to computer or datalogger. Submini jack input allows for electronic calibration

Anti-Saturation

Meter will hold at full scale in fields as high as 100 times the maximum reading.

Power Requirements

One 9-volt alkaline battery. Battery life is approx.

2160 hours at normal background.

TemperatureRange

-10º to 50ºC (14º to 122ºF)

Weight

Inspector: 275 grams (9.7 oz.) without battery.

Size

178 x 95 x 41 mm (7 x 3.8 x 1.6 in.)

Utility Menu

The Utility Menu offers several options accessible by holding down the + button while turning the instrument on. 3 second (fast response)

Includes

Xteme Boot, CE Certification

Limited Warranty

1 year Limited Warranty,

90 day Limited Warranty on GM Tube

Utility Menu

The Utility Menu offers several options accessible by holding down the + button while turning the instrument on.

•3 second (fast response)

•Switches from mR/hr and to µSv/hr and CPS

•Reset the cal factor to 100.

•Adjust the CAL factor.

•Reset all setting to default factory setting.

Access to End Panels on Inspector, Digilert, and Geiger Models with Xtreme Boot

Accessories     

Xtreme Boot

Waterproof Case

Observer Software

Stand

Dashboard Mount

Wipe Test Plate