英國UK優科閥門集團有限公司

進口蒸汽疏水閥的基本作用是將蒸汽系統中的凝結水、空氣和二氧化碳氣體盡快排出；同時限度地自動防止蒸汽的泄露。疏水閥的品種很多，各有不同的性能。選用疏水閥時，首先應選其特性能滿足蒸汽加熱設備的運行，然后才考慮其他客觀條件，這樣選擇你所需要的疏水閥才是正確和有效的。

The fundamental role of the inlet steam trap condensate in the steam system, air and carbon dioxide gas is discharged as soon as possible; while maximizing prevent leakage of steam. Trap many varieties, each with different performance. The selection of traps, the first to be elected its characteristics to meet the optimal operation of the steam heating equipment, before considering other objective conditions, you need to trap this choice is the correct and effective.

機械型：依靠蒸汽疏水閥內凝結水液衛高度的變化而動作。

Mechanical type: rely on steam traps, condensate liquid Methodist height changes and action.

浮球式：浮子為封閉的空心球體

Float type: float a closed hollow sphere

敞口向上浮子式：浮子為開口向上的桶型

Open up float type: float for opening up the bucket

敞口向下浮子式：浮子為開口向下的桶型

Exposure down float type: float opening down the barrel type

熱靜力型：依靠液體溫度的變化而動作

The thermostatic type: rely on the temperature of the liquid changes

雙金屬片：敏感原件為雙金屬片

Bimetal: sensitive original bimetal

蒸汽壓力式：敏感原件為波紋管或墨盒，內部充入揮發性液體。

Steam pressure type: sensitive the original bellows or cartridges, the house filled with volatile liquids.

熱動力型：依靠液體的熱動力學性質的變化而動作。

The thermodynamic type: rely on the change of the thermodynamic properties of the liquid and the action.

圓盤式：由于在相同的壓力下，液體與氣體的流速不同，所產生的不同的動，靜壓力，驅使圓盤閥片動作

Disc formula: under the same pressure, the flow rate of the liquid and gas type, arising from the type of movable and static pressure, the operation of the driven disc valve sheet

脈沖式：由于不同溫度的凝結水通過兩極串連節流孔板式，坐在兩極節流孔板之間形的不同壓力，驅使閥瓣動作。

Pulse: different temperature condensate through the poles concatenation orifice plate, sitting between the two poles throttle plate-shaped pressure drives the action of the valve.

進口疏水閥的品種很多，各有不同的性能。選用疏水閥時，首先應選其特性能滿足蒸汽加熱設備的運行，然后才考慮其他客觀條件，這樣選擇你所需要的疏水閥才是正確和有效的。

Import trap many varieties, each with different performance. The selection of traps, the first to be elected its characteristics to meet the optimal operation of the steam heating equipment, before considering other objective conditions, you need to trap this choice is the correct and effective.

疏水閥要能“識別”蒸汽和凝結水，才能起到阻汽排水作用。“識別” 蒸汽和凝結水基于三個原理：密度差、溫度差和相變。于是就根據三個原理制造出三種類型的疏水閥：分類為機械型、熱靜力型、熱動力型。Trap to be able to identify steam and condensate, to play blocking air drainage. Recognition of steam and condensate based on three principles: the density difference, temperature difference and phase transitions. So on the basis of three principles to create three types of traps: classified as mechanical, thermal static type, thermal power type.

英國UK優科閥門集團有限公司

進口疏水閥，進口蒸汽疏水閥，進口自由浮球式疏水閥，進口杠桿浮球式疏水閥,進口蒸汽倒吊桶式疏水閥,進口膜盒式疏水閥,進口雙金屬片式疏水閥,進口波紋管式疏水閥,進口圓盤式疏水閥,進口氣體疏水閥,進口可調恒溫式疏水閥,進口雙金屬溫調式蒸汽疏水閥,進口內螺紋倒吊桶疏水閥,進口高溫高壓疏水閥,進口高壓疏水閥