1.臺式恒溫恒濕試驗箱體采用數控機床加工成型,造型美觀大方,并采用無反作用把手,操作簡便。
2.內箱采用不銹鋼(SUS304)鏡面板,外箱采用(SUS304)拉絲不銹鋼板或優質冷軋鋼板噴塑,增加了外觀質感和潔凈度。
3.設有大型觀測視窗附照明燈保持箱內明亮,且利用發熱體內嵌式鋼化玻璃,清晰的觀測箱內狀況。
4.箱體左側配直徑25mm或50mm或100mm的測試孔,可供外接測試電源線或信號線使用。
5.保溫材質采用高密度玻璃纖維棉,厚度為80mm。門與箱體之間采用雙層耐高低溫之高張性密封條,以測試區的密封。
6.設有限溫報警系統,過限制溫度及自動中斷運行,試驗進行不發生意外。
7.加濕系統管路與控制線路板分開,可避免因加濕管路漏水發生故障,性。
8.水路系統管路電路系統采用門式開啟,方便維護和檢修。
Constant temperature and humidity tt chamber structure featur:
1. The dk constant temperature and humidity tt chamber box body is made of the numerical control machine tool procsing forming, modelling beautiful generous, and no reaction, simple operation.
2. Inside the box adopts imported advanced stainls steel (SUS304) mirror plate, outside the box adopts (SUS304) wire drawing of stainls steel plate or high quality cold-rolled steel plate coating, increase the appearance quality and cleanlins.
3. Have large observation window attached to the lamp keep bright in the oven, and the use of heating body embedded toughened gl, clear observation of the condition in the cabinet at any time.
4. The box on the left side of the match or 50 mm or 100 mm diameter 25 mm tt hole, used for external tt power supply cord or signal lin.
5. Heat prervation material US gl fiber cotton with high density, thickns is 80 mm. Between the door and cabinet adopts double high and low temperatur
其他說明
| 型 號 | HT/HS-100 | HT/HS-225 | HT/HS-500 | HT/HS-800 | HT/HS-010 | |
|
工作室尺寸 (深*寬*高cm) |
45&tim;45&tim;50 | 50&tim;60&tim;75 | 70&tim;80&tim;90 | 80&tim;100&tim;100 | 100&tim;100&tim;100 | |
|
外形尺寸 (深*寬*高cm) |
110&tim;65&tim;100 | 115&tim;80&tim;130 | 135&tim;100&tim;145 | 145&tim;120&tim;155 | 165&tim;120&tim;155 | |
|
性 能 指 標 |
調節方式 | 平衡調溫調濕方式,(BTHC)PID智能調節 | ||||
| 溫度范圍 | 室溫+10℃~150℃ | |||||
| 濕度范圍 | 85~98%R.H | |||||
| 波動度 | ≤&plun;0.5℃; | |||||
| 均勻度 | &plun;2℃ | |||||
| 濕度偏差 | &plun;3%R.H | |||||
| 濕度波動 | &plun;2.5%R.H | |||||
| 范圍 | 設定、顯示:溫度&plun;0.1℃、濕度&plun;1%R.H | |||||
| 升溫速率 | 平均1-3℃/min | |||||
|
材 質 |
內箱材質 | SUS304鏡面不銹鋼板 | ||||
| 外箱材質 | SUS304不銹鋼霧面線條發紋處理或冷軋鋼板噴塑處理 | |||||
| 保溫材質 | 細玻璃纖維棉+聚氨酯泡沫 | |||||
|
溫 濕 度 調 節 |
加熱器 | 鰭片散熱管形鎳鉻合金不銹鋼電加熱器 | ||||
| 氣流方式 | 寬帶式強迫氣流循環(上出下進) | |||||
| 加濕系統 | 外置隔離式,全不銹鋼淺表面蒸發式加濕器 | |||||
| 供水系統 | 加濕供水采用自動控制,且可回收余水.節水降耗 | |||||
| 循環系統 | 多翼式離心送風機強力送風,寬帶式強迫氣流循環(上出下進) | |||||
|
運 行 控 制 器 |
控制器 | 微電腦溫濕度集成控制器 | ||||
| 運行方式 | 定值運行、程式運行 | |||||
| 記憶容量 | 120組可編程,每個程序999段 | |||||
| 分辨率 | 溫度:&plun;0.1℃,濕度:&plun;1%R.H | |||||
| 傳感器 | 鉑金電阻 PT100Ω/MV | |||||
| 通信功能 | RS-232接口 | |||||
| 附加功能 | 上下限報警,自診斷,報警顯示(故障原因),定時裝置(自動開關機) | |||||
| 標準配置 | 多層加熱除霜附照明玻璃視窗1套、試品架2個、測試用不織布 5片 | |||||
| 裝置 | 無熔絲開關、干燒裝置、限高溫保護、溫濕度偏差報警、壓、過載、缺水、缺相、漏電保護 | |||||
| 電源配置 | AC1 220V 60/50HZ;AC3 380V 60/50HZ | |||||
| 使用環境 | 5℃~+30℃ ≤85%R.H | |||||
| 我公司可以根據客戶的要求定做各種非標高低溫濕熱試驗箱和高低溫濕熱試驗室。 | ||||||








