霍爾轉速傳感器轉速傳感器轉速測定儀轉速位移檢測儀

Hall speed sensor tester rotational speed sensor of displacement detector

型號:G81495

Model: G81495

G81495霍爾轉速傳感器,是一種采用霍爾原理的的轉速傳感器。它的感應對象為磁鋼。當被測體上嵌入磁鋼，隨著被測物體轉動時，傳感器輸出與旋轉頻率相關的脈沖信號，測速或位移檢測的發訊目的。由于安裝使用方便，通用性好，已被廣泛應用于各種領域。

G81495 hall speed sensor, is a kind of adopting the principle of hall speed sensor. It is the induction of object for magnetic steel. When measured on embedded magnets, as the rotating object to be tested, related to the rotation frequency of the pulse signal of sensor signal, achieve the aim of tranission velocity or displacement detection. Due to the installation convenient use, good commonality, has been widely applied in various fields.

技術參數：

Technical parameters:

1.發訊頻率：0~10kHz

1. The tranission frequency: 0 ~ 10 KHZ

2.供電電源：12~25V（DC）

2. Power supply: 12 ~ 25 v (DC)

3.負載電阻：≥1.0kΩ

3. Load resistance: Ω acuity 1.0 k

4.檢測距離：1~4mm （磁鋼）

4. The detection distance: 1 ~ 4 mm (magnet steel)

5.磁鋼尺寸：8×5

5. Magnetic steel size: 8 x 5

6.輸出信號：矩形波 幅值：近電源電壓

6. The output signal: rectangular wave amplitude: close to the power supply voltage

7.環境條件：溫度：-20°C～80°C

7. Environmental conditions: temperature: - 20 ° C to 80 ° C

相對濕度：≤85%

Relative humidity: 85% or less

8.安裝螺紋：M12×1

8. Install thread: M12 x 1

輸出線 棕色：接電源+12V；藍色：接電源地0V；黑色：接信號

Brown: output line to connect power + 12 v. Blue: to connect power to 0 v. Black: pick up the signal

北京冠測精電儀器設備有限公司