Measuring Ranges :
|
Range |
Max Peak |
Upper RMS Limit 1 |
|
10 to 90 dB * |
93 dB |
73 dB |
|
20 to 100 dB * |
103 dB |
83 dB |
|
30 to 110 dB |
113 dB |
93 dB |
|
40 to 120 dB |
123 dB |
103 dB |
|
50 to 130 dB |
133 dB |
113 dB |
|
60 to 140 dB |
143 dB |
123 dB |
Note * : Level non-linearity caused by noise floor is < 0.4 dB at 30 dBA, re IEC 651 and < 1 dB at 26 dBA
Note 1 : with crest factor = 10 or 20 dB
Noise Floor :
Tically 18 dBA
Maximum : 20 dBA RMS
Includes preamplifier's electrical noise and microphone's thermal noise
Detectors : simultaneous RMS and Peak with independent frequency weightings
Linearity Range : 80 dB
Pulse Range : 83 dB
Non-linear Distortion : too all to affect accuracy
Peak Detector Rise Time : < 50 ms
Frequency Weightings : selected independently for RMS and Peak
RMS A and C : according to IEC 651 Te 1
RMS L : flat from 10 Hz to 20 kHz &plun; 2 dB with Te 1 tolerances
Peak C : according to IEC 651 Te 1
Peak L : flat from 10 Hz to 20 kHz &plun; 2 dB with Te 1 tolerances
Time Weightings : Fast, Slow, Impulse, according to IEC 651 Te 1
Display : 4 line LCD showing:
Measuring range and quasi-ogue bar showing input signal
Battery low, pause and overload with hold indicators
Time weighting and elapsed measurement time
Optional back light
The quasi-ogue bar is updated 15 times per second
Displayed parameter level updated once per second
Parameters :
MaxL, MinL, MaxP, Peak, SPL, Leq, SEL, LEP,d and Overload in % of measurement time + variable Ln, default values L90, L50 and L10
Exchange Rate : 3
Resolution :
LN Values : 0.5 dB
Other Parameters : 0.1 dB
Reset :
Resets Buffer including elapsed time to zero. Warning prior to reset if elapsed time > 1 min.
Reset when changing frequency or time weighting
Resets all results in Log, Memory and Buffer if held down together with (Data)
Optional reset when changing level of measurement range, Lns not available if range change is without reset
Microphone : Te 4188 pre polarized free-field 1/2" condenser microphone
Sensitivity : -30 dB re 1 V/Pa &plun; 2 dB
Frequency Range : 8 Hz to 12.5 kHz &plun; 2 dB
Capacitance : 12 pF
Memory : 40 Records of Overall Results
Result Logging : Leq : L10 and L90
Log Rate : 1 s : 10 s : 30 s : 1 m : 5 m : 10 m : 15 m : 30 m and 60 m.
Memory Capacity : 512 Kbytes, equivalent to 86400 sets of results (for example, 24 hours of 1 s logging)
Serial Interface : Compatible with EIA-574
Baud Rate : 1200 - 19200
Data Bits : 8
S Bit : 1
Parity : none
Handshake : Hardwired, XON / XOFF or None
Results Output Format :
Overall : Logged 2318 printer : Logged spreadsheet : Level Distribution : Cumulative Distribution : Distribution resolution 1 to 5 dB
Heading : long or short
DC Output : Short circuit protected coaxial Lemo socket (series 00)
Output : 50 mV/dB equivalent to 0 - 4.15 V
Output Resistance : 100 Ω
Output Parameter : same as the Displayed Parameter
AC Output : Short circuit protected coaxial Lemo socket (series 00)
Maximum Output : 0.5 V RMS corresponding to the of the selected measurement range &plun; 2 dB depending on the microphone's sensitivity
Output Resistance : 100 Ω
Output : output signal from preamplifier (L frequency weighting)
Clock : real time, calendar and measurement duration
Warm up Time : < 5 s
Settling Time : at range change without reset: < 4 ms
Calibration Conditions :
Reference Frequency : 1000 Hz
Reference SPL : 94 dB
Reference Range : 50 - 130 dB, set automatically during calibration sequence
Reference Incidence : Frontal
Environmental :
Storage Temperature : -25 to +70 ° C
Operating Temperature : -10 to +50 °C
Effect of Temperature : < 0.5 dB, -10 to +50 °C
Effect of Humidity : < 0.5 dB for 30 %RH at 40 °C and 1 kHz
Vibration Sensitivity : < 80 dB with L-weighting at 1 m/s-2
Magnetic Field : 80 A/m, 1Ørsted at 50 Hz gives < 34 dBL
Power Supply - Internal :
Batteries : 4 x 1.5 V LR6 / AA size alkaline cells
Battery Life : > 12 hours, tically
Back up battery : keeps clock and memories operating for at least 6 months, if fully charged
External Power Supply:
Voltage : 7 - 15 V DC regulated
Voltage Ripple : < 100 mV peak to peak
Maximum Current : 400 mA
Average Current : 100 mA at 7 V
External Power Supply Socket :
Socket Pin: Positive
Socket Casing : Signal Ground
Socket Pin Diameter : 2.0 mm
Socket External Diameter : 5.5 mm
Dimensions and Weight :
Size : 257 mm x 97 mm x 41 mm
Weight : 460 g including batteries
