DATAPAQ爐溫追蹤系統廣泛應用于汽車鋁部件的固熔處理和時效硬化、鋁棒均化、擠壓前預熱鋁坯生產工藝中的爐溫追蹤和記錄分析，可幫助廣大的熱處理企業:
u 優化產品質量:確認的產品都要求的熱處理以質量。
u 證明過程控制:向自己、客戶或管理機構（ISO9000）證明熱處理過程每天都在按受控的可重復方式進行。
u 產量和效率:消除次品及返工。使產品通過量化并使廢品成本小化。
u 快速故障診斷:出現問題時可找出其原因和位置。
無論何種用途，DATAPAQ都備有解決方案，DATAPAQ專門研究嚴酷環境下的多用途系統
爐溫跟蹤系統與您的工件或材料一起穿越熱處理或加熱爐來監控并儲存工件在整個過程中的真實溫度變化.系統儲存的數據將由分析軟件分析,您得到需要的信息用以優化您的加熱和熱處理過程.
輕松準備
設置數據跟蹤器,并將溫度測量探頭連接到工件,將數據跟蹤器放入隔熱箱.
系統穿越
數據跟蹤器與被測工件一起被送入爐內運行,獲取并記錄成千上萬個溫度數據
分析
用分析軟件了解爐內的真實的熱過程,并進行分析及優化.
隔熱箱尺寸 高(mm) 寬 (mm) 長 (mm) 長度含把手(mm) 重量 (kg)
TB4915 104 247 409 529 9.5
TB4905 129 247 409 529 11
TB4956 154 275 409 529 15.5
TB4912 174 296 411 531 21
TB4938 217 291 402 522 26
TB4926 254 358 443 563 32
TB4933 304 406 493 613 44
The Datapaq 4900 Seri thermal barriers combine experience with
advanced dign technology to give maximum protection to the
data logger as the system p through the furnace. Using a
balanced combination of microporous insulation and phase-change
heat sink, the data logger is kept at a maximum temperature of
58°C throughout the procs,even though the external temperature
may exceed 1,000°C.
FEATUR AND BENEFITS
• Operating temperature up to 1,050°C
• 310 stainls steel exterior (including fasteners) provide the ristance to
oxidation at extreme temperatur
• Datapaq floating plate™ dign technology minimis distortion - sential if
furnace clearance is limited
• Sturdy, 310 stainls steel handl securely welded to base and lid ensur
secure handling when hot
• Health and safety preferred ‘Mullite Textile’ barrier lining eliminat the need for
ceramic fibre
• User replaceable ‘Mullite Textile’ wear strips protect the thermocouple exits
and minimise maintenance costs
• Rounded edg on barrier lid and base alleviate the effects of thermal strs.
• One way lid and base alignment avoids thermal damage through lid
misplacement
