| Bitmap |
| Hubei Kento Electronic Co., Ltd |
| 發光二管產品規格書 |
| Specification for LED Product |
| 產品型號：5KR2UD09 | | | | | |
| ■尺寸規格(毫米) | | | | | | |
| Package Dimensions(mm) | | | | | | |
| | Bitmap | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| 注解: | | | | | | |
| Notes: | | | | | | |
| 1．尺寸單位是mm | | | | | | |
| All dimension units are millimeters. | | | | | |
| 2．未標注尺寸公差為&plun;0.2mm | | | | | |
| All dimension tolerance is &plun;0.2mm unless otherwise noted. | | | | |
| 3．膠體底部與引腳處多膠部分大約為1.5mm | | | | |
| An epoxy meniscus may extend about 1.5mm down the leads. | | | | |
| 4．膠體底部毛邊小于等于0.5mm | | | | | |
| Burr around bottom of epoxy may be 0.5mm max. | | | | | |
| | | | | | | |
| 簡介: | 5.2mm橢圓形 | | | 紅色散射膠體 | | |
| Synopsis: | 5.2mm Oval Te | | | Red Diffused Lens | |
| | 紅色發光二管 | | | | | |
| | Red LED Lamp | | | | | |
| | | | | | | |
| 0, 7, 41, 50, 0, 135, 43, 55 Bitmap |
| Hubei Kento Electronic Co., Ltd |
| 產品型號：5KR2UD09 | | | | | |
| ■主要光電特性(室溫= 25℃)Tical Electrical & Optical Characteristics (Ta = 25℃) |
項目
ITEMS | 號 | 條件 | 小值 | 典型值 | 值 | 單位 |
| SYOL | CONDITION | MIN. | T. | MAX. | UNIT |
| 正向電壓 | VF | IF = 20mA | 1.4 | 1.8 | 2.3 | V |
| Forward Voltage |
| 反向電流 | IR | VR = 5V | --- | --- | 1.1 | μΑ |
| Reverse Current |
| 主波長 | &lada;D | IF = 20mA | 620 | --- | 630 | nm |
| Dominant Wavelength |
| 發光強度 | IV | IF = 20mA | 250 | 338 | 423 | mcd |
| Luminous Intensity |
| 50%能量發光視角 | 2θ½ | IF = 20mA | --- | 34 | --- | deg |
| 50% Power Viewing Angle |
| ■額定值(室溫= 25℃)Absolute Maximum Ratings at (Ta = 25℃) | | |
| 項目 | 號 | 額定值 | 單位 |
| ITEMS | SYOL | ABSOLUTE MAXIMUM RATING | UNIT |
| 正向電流 | IF | 50 | mA |
| Forward Current |
| 峰值正向電流 | IFP | 220 | mA |
| Peak Forward Current |
| 連續工作電流 | IL | 20 | mA |
| Continuous Forward Current |
| 反向電壓 | VR | 5 | V |
| Reverse Voltage |
| 功耗 | PD | 90 | mW |
| Power Dissipation |
| 工作溫度 | Topr | -40 ~ +80 | ℃ |
| Operation Temperature |
| 貯存溫度 | Tstg | -40 ~ +80 | ℃ |
| Storage Temperature |
| 引腳鍍錫溫度 | Tsol | 溫度260℃,長時間5秒 |
| Lead Soldering Temperature | Max.260°C for 5 sec Max. |
| | | | | | | |
| IFP條件：脈沖寬度小于等于10分鐘 | | | | | |
| IFP Conditions：Pulse Width≤10msec duty≤1/10 | | | | | |
| Tsol條件：離膠體底部4mm處為基礎 | | | | | |
| Tsol Conditions：4mm from the base of the epoxy bulb | | | | |
| Bitmap | | | | | | |
| 湖 北 匡 通 電 子 有 限 公 司 |
| Hubei Kento Electronic Co., Ltd |
| 產品型號：5KR2UD09 | | | | | |
| ■半功視角 | | | | | | |
| Spatial Distribution | | | | | | |
| Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| ■性試驗 | | | | | | |
| Reliability Performance | | | | | | |
| 測試分類 | 測試項目 | 測試條件 | 測試持續時間 | 抽樣大小 | 判定 |
| Test Clification | Test Item | Test Conditions | Test Duration | Sample Size | Standard |
| 壽命測試 | 壽命測試 | Ta=25℃&plun;5℃，IF=20mA | 1000小時(hrs) | 10PCS | |
| Life Test | Life Test |
| | 熱沖擊測試 | -10℃&plun;5℃←→+100℃&plun;5℃ | 100循環(cycles) | 10PCS | |
| | Thermal Shock Test | 5min. 10sec. 5min. |
| | 冷熱循環測試 | -55℃&plun;5℃←→+85℃&plun;5℃ | 100循環(cycles) | 10PCS | |
| | Temperature Cycle Test | 30min. 5min. 30min. |
| 環境測試 | 高溫高濕測試 | Ta=85℃&plun;5℃ | 240小時(hrs) | 10PCS | |
| Environment Test | High Temperature ＆ | RH =85%&plun;0.5 %RH |
| | High Humidity Test |
| | 高溫貯存測試 | Ta=100℃&plun;5℃ | 1000小時(hrs) | 10PCS | |
| | High Temperature |
| | Storage |
| | 低溫貯存測試 | Ta=-55℃&plun;5℃ | 1000小時(hrs) | 10PCS | |
| | Low Temperature |
| | Storage |
| | 焊接熱度 | Ta=260℃&plun;5℃ | 5秒(sec.) | 10PCS | |
| 機械測試 | Resistance to |
| Mechanical Test | Soldering Heat |
| | 引腳折彎 | 負荷2.5牛頓(0.25千克) | 3回合(times) | 10PCS | |
| | Lead Integrity | 0° ~ 90° ~ 0° | |
| | | | | | | |
| Bitmap |
| Hubei Kento Electronic Co., Ltd |
| 產品型號：5KR2UD09 |
| ■典型的光電特性曲線 (Ta=25℃ 除非不同地方) | | | | |
| Tical Optical/Electrical Characteristics Curves (Ta=25℃Unless Otherwise Noted) | | |
| | | | | | | |
| Bitmap Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | 電流-電壓曲線 | | |
| | | | Current-Voltage Curve | | |
| | | | | | | |
| Bitmap Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| 電流-光強曲線 | | 電流-光通量曲線 | |
| Current-Luminous intensity Curve | | Current-Luminous flux Curve | |
| | | | | | | |
| Bitmap | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | 波長 | | | | |
| | Wavelengt | | | | |
| Bitmap | | | | | | |
| 湖 北 匡 通 電 子 有 限 公 司 |
| Hubei Kento Electronic Co., Ltd |
| 產品型號：5KR2UD09 | | | | | |
| 1.應用 |
| 此LED可使用于一些普通的電子設備，例如辦公設備，通信設備、房屋裝飾，若LED用在一些性要 |
| 求較高的情況下，如航空運輸，交通控制及醫遼器械時，需參考銷售提供之資料進行使用。 |
| 2.貯存 |
| 貯存LED的環境，溫度不過30℃，相對濕度不過70%。 建議LED在原包裝箱里日期不過三個月 |
| 進行使用，如果需加長貯存時間，建議放在干燥箱內，并加放干燥劑，或者充入氮?dú)狻?nbsp; |
| 3.清洗 |
| 當用化學品清洗膠體時須小心，因?yàn)橛行┗瘜W(xué)品對膠體表面有損傷并引起褪色，如三氯乙烯、 |
| 等。可用乙醇擦拭、浸漬，時間在常溫下不過3分鐘。 |
| 4.引腳裝配 |
| （1）需離膠體2毫米才能折彎支架。 |
| （2）支架成形須用夾具或由人員來完成。 |
| （3）支架成形須在焊接前完成。 |
| （4）支架成形需引腳和間距與線路板上一致。 |
| （5）焊接須在正常溫度下進行，當LED正常焊接到PCB板上后，應盡量避免在LED引腳處施加機械壓力。 |
| Bitmap |
| 5.焊接 |
| 當焊接時，需在膠體底部2mm以下進行焊接，在焊接時，應盡力避免浸漬LED膠體，在剛焊接完后， |
| 應避免在引腳上加外力或者搖動LED膠體。 |
| Pict | | |
| | | |
| | | | | |
| | | | | |
| | | | | | |
| | | | | |
| | | | |
| 6.驅動方式 | | | | | | |
| LED的當前驅動方式 | | | | | | |
| 若LED為多顆并聯時，建議采用線路A，在每顆LED處加一限流電阻，以LED之亮度一致。 |
| Circuit model A | Circuit model B | | |
| Bitmap Bitmap
提示：您在維庫儀器儀表網上采購商品屬于商業貿易行為。以上所展示的信息由賣家自行提供，內容的真實性、準確性和合法性由發布賣家負責，請意識到互聯網交易中的風險是客觀存在的。 請廣大采購商認準帶有維庫儀器儀表網認證的（金牌會員、VIP會員、至尊VIP會員、百維通）供應商進行采購！
手機訪問 
|
